Jump to content

Meitrack MDVR MD600: Difference between revisions

From Deffcon
← Older edit
VisualWikitext
No edit summary
No edit summary
Tag: Manual revert
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Infobox|title=Meitrack MD600|description=MD600 is the second generation of a new solution AI MDVR with high-performance AI processing chips, with a dual-system
== Introduction ==
(dual communication channel), highly stable 6-channel AHD, and 1080P high-definition vehicle-mounted hard disk video recorder.
{{Infobox|title=Meitrack MD600|description=MD600 is the second generation of a new solution AI MDVR with high-performance AI processing chips|image=MEITRACK MDVR MD600 Specifications v1.2-2024-06.png|date=15 April 2025|location=PT. Bumi Suksesindo|category=Fatigue Monitoring System|info=Hardware by Meitrack}}MD600 is the second generation of a new solution AI MDVR with high-performance AI processing chips, with a dual-system (dual communication channel), highly stable 6-channel AHD, and 1080P high-definition vehicle-mounted hard disk video recorder. It possesses high computing power and can support AI applications such as ADAS and DMS.  
It possesses high computing power and can support AI applications such as ADAS and DMS.|image=MEITRACK MDVR MD600 Specifications v1.2-2024-06.png}}
 
The product is based on a dual system of Linux operating system and MCU OS, incorporating advanced technologies including high-performance H.264/H.265 video compression/decompression, 4G, GPS, WiFi, Bluetooth, power-off data protection, wide voltage, high voltage protection, and other technologies. It serves as the core product of the next-generation wireless vehicle-mounted video surveillance solution.
 
Support 6-channel AHD720P/1080P cameras. Embedded high-performance AI video processing chip (optional AI video algorithm: ADAS, DMS). M.2 SSD, which is more suitable for low-temperature environments than conventional hard disks, supports up to 2TB hard disk, and comes with an SD card slot (up to 512G).
 
Adopt industrial grade power supply chip, support 11.4~36V wide range power input, adapt to the harsh environment. It supports dual working modes of local recording and network transmission. The built-in 6-axis sensor can be used for sharp turning, rapid acceleration, rapid deceleration, and other alarms. The self-developed data writing mechanism is adopted to effectively protect the video data and prevent data loss caused by abnormal power failure of the system.
 
'''Caution!!'''
 
Installation Environment
 
# To extend equipment life, please install the equipment in locations with little vibration.
# To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as a trunk), and also keep it about 15 cm away from other objects on the same level.
# The device shall be horizonta lly installed and protected against water, humidity and lightning; in addition, keep the vehicle still during installation to prevent damage to the device due to falling off.
# To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers and driver.
 
== Spesification ==
{| class="wikitable"
|+
!Power Supply
!
|-
|Rated voltage
|DC: 11.4 -36V. Rated at 12V/3A
|-
|Power consumption
|The audio and video on the host is about 6W connected to 6 cameras, about
24W in the day (29W connected to the display), about 32W in the night (37W connected to the display), Connect to a single camera (normal range is 50mA~100mA during the day, 200mA~250mA at night)
|-
|'''AI'''
|
|-
|AI video
|ADAS. DMS
|-
|'''Storage media'''
|
|-
|SD card and SSD hard drive
|1*M2 SSD and 2*SD, Capacity: 2 TB + 2* 512 GB, supports PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD (2280 specifications)
|-
|'''System structure'''
|
|-
|System operation
|Dual system operation, dual communication channels (to prevent data loss)
|-
|'''Audio and video'''
|
|-
|Video input
|6-channels AHD camera, can support D1/720P/1080P arbitrary mixing Adaptive camera resolution and format (PAL and NTSC) Maximum support 6x1080P@15fps real-time video recording
|-
|Video output
|1 channel VGA video output (8Pin aviation head interface), default resolution 1024*7681
1 CVBS aviation plug (level: 1.0Vp-p, impedance: 75Ω)
 
Resolution: PAL 704*576, NTSC 704*480
|-
|Compression standard
|H.264/H.265 configurable
|-
|Image display
|Support 1, 6 screen display
|-
|Audio input
|6 channels for the camera Mic input, the camera should support audio 1 way of intercom handle input 1 channel 3.5MM headphone interface input (GSM call interface)
|-
|Audio ouput
|1 independent audio isolation output (and connected to AV-OUT interface, VGA aviation head interface and intercom handle interface)1 channel 3.5MM headphone interface output (GSM call interface)
|-
|Audio compression
|G.726/G.711a/AAC
|-
|Video request and Playback
|It can retrieve and playback by channel, video type, bitstream type and time
|-
|Video Recording Method
|Ordinary video and alarm video, sound and video recording synchronization
|-
|'''Frequency band'''
|
|-
|MD600
|GSM: B3/B8
WCDMA: B1/B8
 
LTE-FDD: B1/B3/B7/B8/B20/B28
 
LTE-TDD: B38/B40
|-
|'''WiFi/BLE/GNSS'''
|
|-
|WiFi
|IEEE 802.11b /g/n, frequency 2.4G&5.8G, supports STA and AP dual mode
|-
|Bluetooth
|It supports master-slave dual mode, can read Bluetooth accessories, and can configure parameters through APP
|-
|Positioning mode
|GPS/GPS_BEIDOU/GPS_GLONASS
|-
|Positioning accuracy
|2.5m
|-
|Tracking sensitivity
| -162dBm
|-
|GNSS antenna
|Support antenna insert/pull out/short circuit detection
|-
|'''Other'''
|
|-
|SPI Memory
|Built-in 64Mbit for storing GPRS\SMS\GPS LOG data
|-
|Operating temperature
|Without battery: -20 to 70 degrees
|-
|Sensor
|6-axis acceleration sensor
|-
|I/O port
|Main cable port: 8*Din(Max 8*Din) + 2*Dout(Max 8*Dout) + 2*AD(Max 6*AD) + 1*Speed_IN + 1*1-wire + 2*RS485 + 1*CAN + 1*DC_5V + 1*DC_12V
Other interfaces: 2-way RS232, 1-way ACC
|-
|Dimensions
|Dimensions: 120*154*43mm
|-
|Weight
|740g (excluding accessories)
|-
|'''Certification'''
|
|-
|Certification
|CE Certification
|-
|'''Protocol'''
|
|-
|Protocol
|Meitrack Protocol (CCE) RTMP (Audio Video Transport Protocol, also compatible with Meitrack's Audio Video Private Transport Protocol)
|}
 
== Front Host Interface ==
[[File:MD600 - Host Interface.png|none|thumb]]
{| class="wikitable"
|+
!No.
!Interface
!Signage
!Description
|-
|1
|
# 4G indicator light
# REC indicator
# PWR indicator
# GPS indicator
# ALM indicator
# WiFi/Bluetooth indicator
|4G
REC
PWR
GPS
ALM
WIFI
|Green, network status indicator
Green, video status indicator
Red, power supply status indication
Blue, GPS status indicator
Orange, video loss status indication
Green, WIFI& Bluetooth status indicator
|-
|2
|Microphone/speaker port
|Audio
|For external microphone \ speaker +GSM two-way calls
|-
|3
|Infrared interface
|IR
|Infrared receiver (reserved function)
|-
|4
|Debug interface
|debug
|Connect the PC side for parameter
|-
|5
|SIM card
|SIM
|SIM card port
|-
|6
|Lid detection switch
|NA
|Start work only when the lid is detected to have been installed
|-
|7
|SD slot
|SD
|2*SD card loading port
|-
|8
|Electronic locks
|Lock the sign
|Lock the SD\SIM card, which is also the on/off machine for the device
|-
|9
|ETH with USB interface
|ETH & USB
|Used to connect Ethernet for data transfer or parameter configuration. USB is used to upgrade the device and supports USB3.0
|}
 
== Rear Host Interface ==
[[File:MD600 - Host Interface2.png|none|thumb|MD600 - Host Interface2]]
{| class="wikitable"
|+
!No.
!Interface
!Signage
!Description
|-
|1
|Power port
|PWR & ACC
|Red wire power 11.4~40V, rated 12V/3A; The black wire is GND.Yellow wire is connected to ACC high level detection, 3V effective, up to 40V
|-
|2
|Serial Port 1
|RS232_1
|RS232_1: Used for external RFID, ultrasonic oil sensor and other peripherals
|-
|3
|Serial Port 2
|RS232_2
|RS232_2: For extended connection peripherals such as G_MOSE
|-
|4
|24 PIN main cable
|IO&AD&RS485&CAN
|8*Din(Max8*Din)+2*Dout(Max8*Dout)+2*AD(Max6*AD)+1*Speed
_IN+1*1-wire+2*RS232+2*RS485+1*CAN+1*DC_5V+1*DC_12V
|-
|5
|4G antenna port
|4G
|4G antenna access point
|-
|6
|Bluetooth Antenna interface
|BLE
|Bluetooth antenna port
|-
|7
|WiFi antenna interface
|WIFI
|WIFI antenna access point
|-
|8
|GPS antenna interface
|GNSS
|GPS antenna access point
|-
|9
|Video output
|AV-OUT
|Vehicle video CVBS output: Resolution -PAL 704*576,NTSC 704*480
|-
|10
|Video output
|VGA
|Vehicle video VGA output: Default output resolution 1280*720.
|}
 
== Pranala Menarik ==
[[MDVR AI - Fatigue Monitoring System]]
[[Category:Datasheet]]
[[Category:Meitrack]]

Latest revision as of 15:37, 2 June 2025

Introduction

   Meitrack MD600

   Image
Description MD600 is the second generation of a new solution AI MDVR with high-performance AI processing chips

MD600 is the second generation of a new solution AI MDVR with high-performance AI processing chips, with a dual-system (dual communication channel), highly stable 6-channel AHD, and 1080P high-definition vehicle-mounted hard disk video recorder. It possesses high computing power and can support AI applications such as ADAS and DMS.

The product is based on a dual system of Linux operating system and MCU OS, incorporating advanced technologies including high-performance H.264/H.265 video compression/decompression, 4G, GPS, WiFi, Bluetooth, power-off data protection, wide voltage, high voltage protection, and other technologies. It serves as the core product of the next-generation wireless vehicle-mounted video surveillance solution.

Support 6-channel AHD720P/1080P cameras. Embedded high-performance AI video processing chip (optional AI video algorithm: ADAS, DMS). M.2 SSD, which is more suitable for low-temperature environments than conventional hard disks, supports up to 2TB hard disk, and comes with an SD card slot (up to 512G).

Adopt industrial grade power supply chip, support 11.4~36V wide range power input, adapt to the harsh environment. It supports dual working modes of local recording and network transmission. The built-in 6-axis sensor can be used for sharp turning, rapid acceleration, rapid deceleration, and other alarms. The self-developed data writing mechanism is adopted to effectively protect the video data and prevent data loss caused by abnormal power failure of the system.

Caution!!

Installation Environment

  1. To extend equipment life, please install the equipment in locations with little vibration.
  2. To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as a trunk), and also keep it about 15 cm away from other objects on the same level.
  3. The device shall be horizonta lly installed and protected against water, humidity and lightning; in addition, keep the vehicle still during installation to prevent damage to the device due to falling off.
  4. To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers and driver.

Spesification

Power Supply
Rated voltage DC: 11.4 -36V. Rated at 12V/3A
Power consumption The audio and video on the host is about 6W connected to 6 cameras, about

24W in the day (29W connected to the display), about 32W in the night (37W connected to the display), Connect to a single camera (normal range is 50mA~100mA during the day, 200mA~250mA at night)

AI
AI video ADAS. DMS
Storage media
SD card and SSD hard drive 1*M2 SSD and 2*SD, Capacity: 2 TB + 2* 512 GB, supports PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD (2280 specifications)
System structure
System operation Dual system operation, dual communication channels (to prevent data loss)
Audio and video
Video input 6-channels AHD camera, can support D1/720P/1080P arbitrary mixing Adaptive camera resolution and format (PAL and NTSC) Maximum support 6x1080P@15fps real-time video recording
Video output 1 channel VGA video output (8Pin aviation head interface), default resolution 1024*7681

1 CVBS aviation plug (level: 1.0Vp-p, impedance: 75Ω)

Resolution: PAL 704*576, NTSC 704*480

Compression standard H.264/H.265 configurable
Image display Support 1, 6 screen display
Audio input 6 channels for the camera Mic input, the camera should support audio 1 way of intercom handle input 1 channel 3.5MM headphone interface input (GSM call interface)
Audio ouput 1 independent audio isolation output (and connected to AV-OUT interface, VGA aviation head interface and intercom handle interface)1 channel 3.5MM headphone interface output (GSM call interface)
Audio compression G.726/G.711a/AAC
Video request and Playback It can retrieve and playback by channel, video type, bitstream type and time
Video Recording Method Ordinary video and alarm video, sound and video recording synchronization
Frequency band
MD600 GSM: B3/B8

WCDMA: B1/B8

LTE-FDD: B1/B3/B7/B8/B20/B28

LTE-TDD: B38/B40

WiFi/BLE/GNSS
WiFi IEEE 802.11b /g/n, frequency 2.4G&5.8G, supports STA and AP dual mode
Bluetooth It supports master-slave dual mode, can read Bluetooth accessories, and can configure parameters through APP
Positioning mode GPS/GPS_BEIDOU/GPS_GLONASS
Positioning accuracy 2.5m
Tracking sensitivity -162dBm
GNSS antenna Support antenna insert/pull out/short circuit detection
Other
SPI Memory Built-in 64Mbit for storing GPRS\SMS\GPS LOG data
Operating temperature Without battery: -20 to 70 degrees
Sensor 6-axis acceleration sensor
I/O port Main cable port: 8*Din(Max 8*Din) + 2*Dout(Max 8*Dout) + 2*AD(Max 6*AD) + 1*Speed_IN + 1*1-wire + 2*RS485 + 1*CAN + 1*DC_5V + 1*DC_12V

Other interfaces: 2-way RS232, 1-way ACC

Dimensions Dimensions: 120*154*43mm
Weight 740g (excluding accessories)
Certification
Certification CE Certification
Protocol
Protocol Meitrack Protocol (CCE) RTMP (Audio Video Transport Protocol, also compatible with Meitrack's Audio Video Private Transport Protocol)

Front Host Interface

No. Interface Signage Description
1
  1. 4G indicator light
  2. REC indicator
  3. PWR indicator
  4. GPS indicator
  5. ALM indicator
  6. WiFi/Bluetooth indicator
 4G

REC PWR GPS ALM WIFI

Green, network status indicator

Green, video status indicator Red, power supply status indication Blue, GPS status indicator Orange, video loss status indication Green, WIFI& Bluetooth status indicator

2 Microphone/speaker port Audio For external microphone \ speaker +GSM two-way calls
3 Infrared interface IR Infrared receiver (reserved function)
4 Debug interface debug Connect the PC side for parameter
5 SIM card SIM SIM card port
6 Lid detection switch NA Start work only when the lid is detected to have been installed
7 SD slot SD 2*SD card loading port
8 Electronic locks Lock the sign Lock the SD\SIM card, which is also the on/off machine for the device
9 ETH with USB interface ETH & USB Used to connect Ethernet for data transfer or parameter configuration. USB is used to upgrade the device and supports USB3.0

Rear Host Interface

MD600 - Host Interface2
No. Interface Signage Description
1 Power port PWR & ACC Red wire power 11.4~40V, rated 12V/3A; The black wire is GND.Yellow wire is connected to ACC high level detection, 3V effective, up to 40V
2 Serial Port 1 RS232_1 RS232_1: Used for external RFID, ultrasonic oil sensor and other peripherals
3 Serial Port 2 RS232_2 RS232_2: For extended connection peripherals such as G_MOSE
4 24 PIN main cable IO&AD&RS485&CAN 8*Din(Max8*Din)+2*Dout(Max8*Dout)+2*AD(Max6*AD)+1*Speed

_IN+1*1-wire+2*RS232+2*RS485+1*CAN+1*DC_5V+1*DC_12V

5 4G antenna port 4G 4G antenna access point
6 Bluetooth Antenna interface BLE Bluetooth antenna port
7 WiFi antenna interface WIFI WIFI antenna access point
8 GPS antenna interface GNSS GPS antenna access point
9 Video output AV-OUT Vehicle video CVBS output: Resolution -PAL 704*576,NTSC 704*480
10 Video output VGA Vehicle video VGA output: Default output resolution 1280*720.

Pranala Menarik

MDVR AI - Fatigue Monitoring System

Retrieved from "https://deffcon.com/index.php?title=Meitrack_MDVR_MD600&oldid=500"